Vendor productsProducts found: 851

Sika Plug is a chloride free, ready for use powder based on high alumina cement. When mixed with water, it becomes a powerful, fast setting waterplug.

Sikalastic®-1K is a one component, flexible, fibre-reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.

High performance, self-levelling and fast drying compound for interior or exterior use up to 30mm.

ARDEX WPM 3000X is a peel and stick SBS rubber modified bituminous/asphalt membrane.

Sikaflex® Tank N is a one part, moisture curing, elastic joint sealant which is used in areas for the storage, filling and handling of water polluting liquids.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

SPECTRALOCK PRO Premium Grout* has all the great features of SPECTRALOCK PRO Grout - colour uniformity, durability and ease of installation - with enhanced performance.

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

Information ARDITEX NA ARDITEX NA is formulated with excellent adhesion designed to work perfectly UNDER a damp proof membrane. Also used to pre-level existing timber floors prior to the installation of timber sheeting for a stable base for new floor coverings. Thickness: Feather...

Sika MonoTop-412 NFG is a 1-component, polymer modified, fibre reinforced, low shrinkage structural repair mortar with corrosion inhibitor meeting the requirement of class-R4 of EN 1504-3.

INFORMATION ARDEX X 42 ARDEFLEX ARDEX X 42 Ardeflex is a rubber modified wall and floor tile adhesive for fixing ceramic tiles in both interior and covered exterior (with satisfactory falls) locations. Tile Types: Most tile types including ceramics, porcelains, non-moisture sensitive...

Sikalastic-488/488SL (au) is a high performance, hand-applied, low VOC, moisture-curing single-pack elastomeric polyurethane waterproofing membrane. Sikalastic-488/488SL (au) is directly foot-trafficable.

Sikaflex-PRO is a one component, thixotropic, polyurethane based joint sealant. It cures under the influence of atmospheric moisture to form an elastomeric material with adhesive properties, in some cases without the need for priming of the substrate.

High quality, pre-mixed latex liquid primer. Sikafloor Level PRO Primer is a pre-mixed latex liquid designed for the priming of porous substrates prior to the use of Sikafloor® Cement based levelling products.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

HYDRO BAN Fillet & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant.

ARDEX A 36 Abascreed is a factory proportioned premixed sand/cement screed for internal and external use.

ARDEX WR 120 FR is a fine-grade, fibre-reinforced, acrylic render suitable for rendering walls, both internally and externally, at an application thickness from 2-12 mm.

Primer for Bituminous Membranes

Sika MonoTop®-436 N is a 1-component pre-bagged, pourable, self-compacting, repair mortar meeting the requirements of class R4 of EN 1504-3.

Sikadur 501 Sand Part C 5kg of Sikadur 41 10kg Kit

SikaSwell S-2 is one component polyurethane sealant which swells in contact with water.

LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. The adhesive spreads easily and cleans with water while fresh.

ARDEX CA 20 P has high initial tack with high bond strength that adheres to virtually every building material. Works on dry or wet surfaces and even underwater.

A bonding agent designed to improve shear and tensile bond strength of sand/cement screeds, renders and ARDEX standard cement-based adhesives.

Siak Sikafloor Level TOP is an self levelling compound that can be laid 2mm to 30mm thick in one application.

PERMACOLOR Grout is a high performance grout that provides a grout joint that is dense, hard and will resist cracking.

Ardex WA 98 Butynol Adhesive Specially developed for bonding butyl rubber sheeting to roofing substrates Formulated for optimum performance for spraying Combined with its long tack life, it is ideal for bonding large areas Information ARDEX WA 98 Adhesive Specially formulated...

315 Super Floor & Wall Adhesive (Previously 290 Super Floor & Wall Thin-Set Adhesive) is a high performance thin-set adhesive to install tile and stone using the thin-bed method of installation. Mix with water or fortify with LATICRETE latex admixture.

The Sika AcouBond System consists of the sound dampening, one component adhesive. SikaBond-T53 and the SikaLayer-05 foam mat.

Sikabond-T53 is a one-part polyurethane adhesive for timber flooring systems. The adhesive is of high viscosity and cures on exposure to atmospheric moisture.

Sikafloor 01 Primer is a porous & non-porous concentrated primer for use in conjunction with Sikafloor cement based levelling products. Versatile liquid primer designed to be applied direct from packaging as a non-porous priming solution, or diluted for porous concrete surfaces.

Sikafloor 160 is a 2 part solvent free epoxy primer and binder, modular Sikafloor system.

Sikafloor 160 Part B is a 2 part solvent free epoxy primer and binder, modular Sikafloor system.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

PERMACOLOR Grout is a high performance grout that provides a grout joint that is dense, hard and will resist cracking.

PERMACOLOR Grout is a high performance grout that provides a grout joint that is dense, hard and will resist cracking.

254 Platinum Adhesive is the ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick.

Prewashed Gravel (2 to 5mm)

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

A red water-based acrylic primer designed to seal porous substrates and enhance the adhesion of subsequent Superflex membranes.

Ardex Heavy Duty Dual-Cartridge Caulking Gun (1:1 & 2:1 Ratio / 470ml & 627ml)

The Rhino Concrete Crack Lock (CCL) is a revolutionary new product that was developed to improve concrete crack repair.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Sikaflex-PRO is a one component, thixotropic, polyurethane based joint sealant. It cures under the influence of atmospheric moisture to form an elastomeric material with adhesive properties, in some cases without the need for priming of the substrate.

SikaGrout-212 HP is a blend of Portland cement, carefully selected and graded aggregates and Sika Admixtures, enabling it to achieve high strengths in short times, making SikaGrout-212 HP suitable for grouting fixing bolts and anchors or bedding machinery in the most demanding of circumstances.

SikaGrout-HES is a ready mixed, high quality, grout that sets rapidly with high early strengths. SikaGrout-HES is a blend of high alumina cement, selected and graded aggregates, and Sika admixtures, enabling it to achieve high strengths in short time frame.

Sikadur-42 HF is a pourable, multi-functional high density epoxy grout based on a 2-component solvent free epoxy resin system containing fine fillers. Sikadur-42 HF exhibits excellent flow characteristics in general grouting applications.

SikaQuick 2500 (au) is a one component, very rapid hardening, early strength gaining, cementitious patching material for concrete.

SikaTite® UnderTile is a fast curing, single component, class 3 waterproofing membrane. Water based synthetic rubber waterproofing membrane for under-tile, and protected applications.

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

PERMACOLOR Grout is a high performance grout that provides a grout joint that is dense, hard and will resist cracking.

Rapid Hardening & Drying Repair Mortar

ARDEX WPM 300 is a two component water based epoxy polyamide membrane/barrier coating.

ARDEX WPM 405 is an SBR, multipurpose, concentrated liquid polymer additive which when used with sand/cement greatly improves the bond strength and flexibility.

Mixing Nozzles for ARDEX Crack Injection Range