Lithofin Buyer's Guide — TradieCart
This guide helps you choose the right Lithofin product for your job. Lithofin is a German specialist in stone and tile care, organised into two main ranges: MN for natural and artificial stone, and KF for ceramic and porcelain tiles.
Product Range
| Product | Best For |
|---|---|
| MN Stain-Stop | Flagship solvent-based impregnator for natural stone (marble, granite, limestone, travertine, engineered stone). Oil and water repellent, up to 7 years outdoor protection. The go-to sealer for stonemasons and fabricators. Available 500ml–20L. |
| MN Stain-Stop ECO | Water-based alternative to MN Stain-Stop — low VOC, ideal for limestone and indoor jobs where solvent odour is a concern. |
| KF Stain-Stop | Water-based impregnator for porous porcelain and ceramic tiles. Covers up to 50 m²/L — the cost-effective choice for tiled floors and walls. |
| MN Colour Intensifier | Darkens and enhances the natural colour of stone while providing water-repellent protection. Ideal for honed or textured finishes that need a richer look. |
| NanoTOP | Premium sealer specifically for kitchen benchtops and vanities — food-safe finish on engineered and natural stone. |
| KF Intensive Cleaner | Heavy-duty alkaline concentrate for ceramic and porcelain tiles — dilutes up to 1:10 for everyday use or full strength for ingrained grime. |
| KF Cement Residue Remover | Acid-based concentrate for removing grout haze, cement film and efflorescence from ceramic and porcelain tiles after installation. |
| MN Builders' Clean | Acid-based post-construction cleaner for acid-resistant natural stone (granite, quartzite, rough limestone). Removes cement residue, efflorescence, limescale and rust. Not for polished marble or limestone. |
| MN Power-Clean / MN Easy-Care | Everyday stone maintenance — Power-Clean for intensive cleaning, Easy-Care for regular upkeep without film build-up. |
| Specialist Stain Removers | Targeted products: Rust-EX (rust), OIL-EX (oil/grease), Resin-EX (epoxy), ALGEX (algae/moss), KF Mildew-Away (mould). |
All products are backed by AUS/NZ technical datasheets. Coverage varies by porosity — check the datasheet for your specific stone.
Quick Recommendation Guide
- Sealing a granite or marble benchtop → MN Stain-Stop (solvent-based, long-lasting) or NanoTOP for the best benchtop-specific finish
- Sealing porcelain or ceramic tiles → KF Stain-Stop (water-based, high coverage, cost-effective)
- Indoor limestone or low-VOC job → MN Stain-Stop ECO
- Removing grout haze after tiling → KF Cement Residue Remover
- Post-build clean on granite pavers or outdoor stone → MN Builders' Clean
- Enhancing colour on honed or textured stone → MN Colour Intensifier
Key Features & Benefits
- German-engineered, world-leading stone and tile care range — family-owned since 1974
- Two clearly separated ranges (MN for stone, KF for tile) take the guesswork out of product selection
- AUS/NZ technical datasheets available for every product — coverage, dwell times and application specs all documented
- Up to 20-year sealer warranty when applied by a Certified Lithofin Applicator (CLA)
- Green by Lithofin eco range available for sustainability-focused projects
- Distributed in Australia through CDK Stone — the trusted master distributor for stonemasons and tilers
Common Questions
Should I use MN Stain-Stop or KF Stain-Stop? — MN Stain-Stop is solvent-based for natural and artificial stone. KF Stain-Stop is water-based, made for porcelain and ceramic tiles. Match the product to the substrate.
What's the difference between MN Stain-Stop and MN Stain-Stop ECO? — Same protection level, different carrier. ECO is water-based with lower VOCs — better for indoor jobs, limestone, and where solvent odour matters. Standard MN Stain-Stop has a longer outdoor track record.
How much does MN Stain-Stop cover? — Roughly 7–15 m²/L on typical natural stone. Polished surfaces go further (up to 25 m²/L), rough or porous stone less (5–7 m²/L). Always check the datasheet for your stone type.
Can I use MN Builders' Clean on polished marble? — No. It's acid-based and will etch polished marble and limestone. Use it on granite, quartzite, rough limestone and similar acid-resistant stones only.
Do I need MN Colour Intensifier or MN Stain-Stop? — Stain-Stop seals without changing the look. Colour Intensifier seals AND darkens/enhances the stone's natural colour — choose based on whether you want the wet-look finish.
What's the best sealer for a stone kitchen benchtop? — NanoTOP is purpose-designed for benchtops and vanities with a food-safe finish. MN Stain-Stop also works well for general benchtop sealing.
Why Choose Lithofin?
- Global benchmark for stone and tile care — trusted by stonemasons, fabricators and tilers across 25+ countries
- Full range covers the three stages of stone care: clean, protect, maintain — so you can use one brand end-to-end
- Backed by AUS/NZ datasheets and the CLA warranty program for long-term confidence
- Fast Australian delivery via TradieCart — visit the website for current prices and stock