Sika SikaTile 110 Secure Proof (Sikalastic WPU) Grey 15 Litres Water Based Polyurethane Waterproofing Membrane

Sika SikaTile 110 Secure Proof (ex Sikalastic WPU) Grey 15 Litres Water Based Polyurethane Waterproofing Membrane

A premium performance, Class III, fibre reinforced, ready to use, water-based polyurethane waterproofing membrane designed for under tile and stone applications.

SikaTile®-110 Secure Proof is a premium performance, flexible class III, ready to use, fibre reinforced, water based polyurethane waterproofing membrane designed for internal and external areas including wet areas, balconies, terraces, and above ground external applications. SikaTile®-110 Secure Proof is a suitable undertile waterproofing membrane that complies to AS/NZS 4654:2012 and AS 4858:2004.

Usage

SikaTile®-110 Secure Proof is suitable for use on walls and floors for both internal and external applications. SikaTile®-110 Secure Proof is suitable for most typical construction substrates such as.

• Concrete
• GRC - Glass reinforced concrete
• Cement boards and sheets including Scyon
• Renders and screeds
• Cement coated light weight construction boards
• Plasterboard
• Structural Plywood
• Autoclaved Aerated Concrete (AAC)

Advantages

• Premixed, ready to use
• UV Stable - Exposed rooftops & balconies under pedestal and paver
• High extensibility, Class III
• High elongation >500%
• Class III flexible performance
• Solvent free, water-based
• Fibre reinforced
• Excellent antifracture properties
• Excellent cure time
• Low VOC

Packaging

15 Litre Pail / 32 Pails per pallet

Colour

Grey

Product Details

Certificates and Test Reports

• BRANZ AS/NZS 4654.1:2012 - Test Certificate DC14429-03
• Branz AS/NZS 4858:2004 - Test certificate DCDC13205-003
• Green Star - VOC Content Test Certificate

Green Star Design & As Built V1.3-13.1.1B

Green Star Interiors V1.3-12.1.1B

62 Grams per Litre as VOC content per material

Shelf life

12 months from date of manufacture when stored unopened in elevated, cool, dry location.

Storage conditions

Store in dry cool conditions out of direct sunlight. Do not allow membrane to freeze.

Volatile organic compound (VOC) content

62g/L - ASTM D3960-05

Shore A hardness

72

Tensile strength

2.1MPa

Permeability to water vapour

1.55g/m2 / 24 hours

Application

Ambient air temperature

5°C to 35°C

Applied product ready for use

• Ready for 2nd coat: 1-2 hours after 1st coat
• Ready for tiling: 6-8 hours after final coat
• Ready for flood testing: 48 hours
• Return to service: 3+ days

All measurements are taken at 23ºC and 50% relative humidity. Specifications vary according to site conditions and should be taken as a guide only.

Consumption

The minimum dry film thickness required is 1.0mm applied in a minimum of 2 coats.

The SikaTile®-110 Secure Proof shall be applied to the substrate at a rate of 0.75mm wet film thickness per coat.

A 15Ltr pail will cover approximately 10m2.

The minimum dry film thickness for Pedestall and Paver application is 1.62mm.

Equipment

• Brush, or short nap roller
• Protective personal equipment

Substrate Preparation

Substrate Priming Chart

• General Priming: SikaTile 010 Secure Prime
• Green screeds or renders: Sikalastic® Moisture Seal
• Autoclaved Aerated Concrete: SikaTile 010 Secure Prime
• Existing tiles: Sika® Prep n Prime

Refer to the primer data sheet for additional information.

Application

Apply the SikaTile®-110 Secure Proof to substrate with a medium nap roller allowing to dry between coats.

Under tile applications shall be applied in a minimum of 2 coats to acheive a minimum dry film thickness of 1.0mm.

Under pedestall and paver application shall be applied in a mnimum 3+ coats to achesive a minimum dry film thickness of 1.62mm.

Cleaning of Equipment

Clean all tools and application equipment immediately after us with water. Once cured, residual material can only be removed mechanically.