Sika

Sikaflex Fillet Sikaflex Fillet Joint is a one component thixotropic and fast curing flexible sealant for professional waterproofing applications. Uses Sikaflex Fillet Joint is used as a general purpose sealant for sealing joint in building construction. Sikaflex®-Fillet Joint is...

ECO SYSTEMS ECO SCREED is a pre blended screed underlayment consisting of graded sand, cement and additives specially formulated for interior and exterior floors prior to the installation of AquaBlokTM waterproofing membranes, ceramic tiles, natural stone, carpet, wood and parquetry flooring. Suitable for a variety of domestic and commercial application.

Sikafloor Duraseal is a one component penetrating non-yellowing protective sealer for concrete floors.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikalastic WPU Elastomeric, single component, fibre reinforced, water based polyurethane membrane. Sikalastic® WPU is a premixed, single component, water based polyurethane waterproofing membrane. Sikalastic® WPU is a Class III membrane with high...

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

Sikabond-T55 (J) is a one-part polyurethane adhesive for direct elastic bonding of timber floors. The adhesive is of low viscosity and cures on exposure to atmospheric moisture.

Sikafloor-263 SL/264 is a 2-component solvent free pigmented epoxy resin based flooring system. The material can be classified into three systems: 1. Sikafloor-264: a high build roll on coat 2. Sikafloor-263 SL: a smooth self levelling floor topping system 3. Sikafloor-263 NS: an anti-slip self levelling floor topping system.

Sikadur 506 Sand 20kg for Sikafloor 94/91

A WATER BASED FLEXIBLE PRIMER FOR NON POROUS SUBSTRATES 

Formol is a chemical release agent applied to concrete formwork. It is designed to act as a bond breaker between formwork or moulds and freshly placed concrete.

A WATER BASED FLEXIBLE PRIMER FOR NON POROUS SUBSTRATES 

A SYNTHETIC LATEX BASED PRIMER FOR POROUS SURFACES

One-component cementitious mortar, fibre-reinforced for flexible waterproofing and concrete protection.

PROHESIVE PROMAXSET is a high strength, polymer modified, flexible, cement based adhesive which has been specially developed for installing most types of tiles. It can be used for internal and external situations for floor and wall tiling. The non slip/slump characteristics make it ideal for installing large and heavy tiles.

SikaGrout GP is a general purpose cementitious grout that is shrinkage compensated. SikaGrout GP is a blend of Portland cement, carefully selected and graded aggregates and admixtures.

A WATER BASED FLEXIBLE PRIMER FOR NON POROUS SUBSTRATES 

PROHESIVE ECOPRO is an economical, polymer and rubber modifies, flexible, cement based adhesive that is suitable for bonding most types of tiles. It has been specially formulated to provide extended coverage and it can be used for both internal and external situations for floor and wall tiling.

PROHESIVE PROMAXSET is a high strength, polymer modified, flexible, cement based adhesive which has been specially developed for installing most types of tiles. It can be used for internal and external situations for floor and wall tiling. The non slip/slump characteristics make it ideal for installing large and heavy tiles.

CTA Prohesive Promaxset PLUS Powder Off-White 20kg Tile Adhesive DESCRIPTION Prohesive ProMaxset Plus is a Premium, Cement Based, Polymer Fortified, Flexible Adhesive designed for a vareity of Tile & Stone applications. USES Prohesive ProMaxset Plus is Suitable for fixing tile...

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Sikafloor Broadcast  B1

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

Sikafloor-CureHard-24 us a one part, clear liquid based on sodium silicate to cure, harden and seal fresh or hardened concrete. It reacts with the calcium hydroxide in the concrete to produce an improved resistant and dust free finish.

Sikafloor 161 is an economic, two part, low viscosity epoxy resin for the use where substrate moisture content is between 4% to 6% by Tramex meter.

Sikafloor-CureHard-24 us a one part, clear liquid based on sodium silicate to cure, harden and seal fresh or hardened concrete. It reacts with the calcium hydroxide in the concrete to produce an improved resistant and dust free finish.

Sikadur-42 (au) is a 3-component pourable or castable grout based on a solvent free epoxy resin and selected aggregates. Sikadur-42 (au) cures to form a hardened mortar with excellent adhesion to many substrates. This combined with the product’s ease of application makes it ideally suited to site application.

SikaSwell S-2 is one component polyurethane sealant which swells in contact with water.

Sika MaxTack is a one part high strength, copolymer dispersion adhesive.

Sikagard-62 is a two component high build thixotropic protective coating based on epoxy resin. When cured Sikagard-62 provides a hard, glossy film with high resistance to abrasion and chemical attack.

High strength, solvent free timber flooring adhesive. Excellent workability, elasticity and bead stability. Very low VOC and odourless. Fast curing and excellent sound dampening qualities.

SikaTite-BE is a water based bitumen emulsion modified with acrylic latex polymers. It can be applied as a waterproof membrane, sealant, protective coating or adhesive. It is designed for use underground, internal and immersed areas.

Sikalastic-488/488SL (au) is a high performance, hand-applied, low VOC, moisture-curing single-pack elastomeric polyurethane waterproofing membrane. Sikalastic-488/488SL (au) is directly foot-trafficable.

Sikagard-703W is a liquid, ready for use, silane/siloxane based impregnation.

Hydrophilic profile for construction joint sealing which swells in contact with water and particularly salt water, such as sea water and water containing de-icing salts.

Sika CureCrete is a water based membrane forming liquid for curing, dustproofing and hardening concrete. Sika CureCrete is suitable for use over new and old concrete and performs well both inside and outside without the adverse effects of solvent based systems.

Sika Injection Packers are filling valves or ports and connection pieces between the injection equipment and the structure. One way valves are located on the top of the injection packer and connect to the injection equipment.

Sika Plug is a chloride free, ready for use powder based on high alumina cement. When mixed with water, it becomes a powerful, fast setting waterplug.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Surface primer and adhesion promoter. For use on damp concrete, clay brick, ceramic tiles, granite, besser blocks and epoxy mortars. Prepares substrate surface to maximise sealant and adhesive bond performance. Recommended for use where bond line is exposed to significant stress.

AQUABLOK SBR is a waterborne flexible waterproof membrane designed for use under tiled finishes that is capable of accommodating expected structural movement.

Sikadur-42 HF is a pourable, multi-functional high density epoxy grout based on a 2-component solvent free epoxy resin system containing fine fillers. Sikadur-42 HF exhibits excellent flow characteristics in general grouting applications.

Sikagard-720 EpoCem is a 3-component epoxy-modified cementitious sealing and levelling mortar, suitable for application to most mineral based substrates. It’s specific balanced formulation ensures that the properties of the hydrated cement are both complemented and enhanced by the integral epoxy mortar.