Stellmann Coating and Paint Stripper 12 Litres Coating Remover
Need help with technical specifications or product compatibility?
Chat with Ask TradieCart, our AI specialistStellmann Coating and Paint Stripper – 12 Litres
Stellmann Coating and Paint Stripper is an eco-friendly, methylene chloride-free (dichloromethane-free) coating and paint remover. Its strong dissolving and swelling action penetrates old coating and paint layers quickly and deeply, making it easy to remove Stellmann Non-Slip Clear PRO and other single- and dual-component coating systems.
It is suitable for removing common paints and coatings including synthetic resin paints, oil-based paints, dispersion paints and 2-component PU paints.
â €Technical Data
| Theoretical coverage | 3–6 m² per litre |
| Viscosity | Paste-like (stir well before use) |
| Density | Approx. 0.97 kg/L |
| Colour | Colourless to milky in liquid state |
| Dwell time | Approx. 40–60 minutes; 2–5 hours on etched, rough or highly structured surfaces |
| Shelf life | 36 months in a well-sealed original container |
â €Application
- Open carefully — the contents may be under pressure, especially in warm weather. Stir for 4 minutes before use.
- Test on a small, inconspicuous area first to check working time, usage and any effect on the underlying surface.
- Brush on an even layer and cover with a clear plastic drop sheet to speed removal and stop the stripper drying out.
- Once the coating has fully lifted, remove the drop sheet and scrape off the residue. Repeat if needed.
- Neutralise by rinsing two to three times with clean cold water, then clean with Stellmann Prep and Maintenance Cleaner and rinse again.
â €Limitations
- Do not use on polystyrene systems. On timber, run a preliminary test before recoating.
- Wear PPE as per the SDS, including gloves and safety goggles, and keep the area well ventilated.
- Do not apply outdoors when rain threatens. Observe local rules for wastewater and waste disposal.
- Adhesive Removers
- Cleaning Chemicals
No reviews found