Vendor productsProducts found: 850

Sikafloor Duraseal is a one component penetrating non-yellowing protective sealer for concrete floors.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. The adhesive spreads easily and cleans with water while fresh.

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

Sikabond-T55 (J) is a one-part polyurethane adhesive for direct elastic bonding of timber floors. The adhesive is of low viscosity and cures on exposure to atmospheric moisture.

Sikafloor-263 SL/264 is a 2-component solvent free pigmented epoxy resin based flooring system. The material can be classified into three systems: 1. Sikafloor-264: a high build roll on coat 2. Sikafloor-263 SL: a smooth self levelling floor topping system 3. Sikafloor-263 NS: an anti-slip self levelling floor topping system.

Sikadur 506 Sand 20kg for Sikafloor 94/91

The Rhino Concrete Crack Lock (CCL) is a revolutionary new product that was developed to improve concrete crack repair.

Formol is a chemical release agent applied to concrete formwork. It is designed to act as a bond breaker between formwork or moulds and freshly placed concrete.

MVIS™ Veneer Mortar is a patented, versatile polymer fortified mortar designed specifically for the installation of adhered masonry veneer, stone and thin brick.

254 Platinum Adhesive is the ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick.

ARDEX WA 100 is a high strength two part epoxy stone adhesive that exhibits superior bond strength.

315 Super Floor & Wall Adhesive (Previously 290 Super Floor & Wall Thin-Set Adhesive) is a high performance thin-set adhesive to install tile and stone using the thin-bed method of installation. Mix with water or fortify with LATICRETE latex admixture.

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

A two part, rubber based wall and floor tile adhesive. It is especially formulated to fix tiles over substrates subject to thermal and shrinkage movement.

Eco Systems, Eco-Silent mat is a resilient high performance durable acoustic underlay that provides an isolating layer between structural components or finishes and substrates to significantly reduce and minimise the transfer of impact energy and sound through the substrate. Eco-Silent mat is designed for under tiles, timber and vinyl floors. Is crush resistant and provides excellent noise reduction, vibration reduction and thermal insulation in a variety of building applications. Easy to install and is made from recycled rubber. It remains permanently flexible and is resistant to aging and degradation. Eco Systems Mat is available in a range of thicknesses, making it suitable for a variety of flooring system applications. Eco-Silent Mat is suitable for use with Eco-Systems Silent Mat Adhesive.

STRATA_MAT™ is a next generation high performance uncoupling mat for use under ceramic tile and stone installations, for both residential and commercial applications.

125 TRI MAX™ provides incredible sound isolation protection while simultaneously protecting the tile or stone finish from any cracking by reducing the transmission of stresses in the substrate through to the tile or stone finish.

ARDEX X 7 Wall and Floor Tile Adhesive Weather Resistant Easy to use, universal tile adhesive system 24 hour green bonded screed capable Information ARDEX X 7 ARDEX X 7 is a white cement-based wall and floor tile adhesive. ARDEX X 7 has an extended open time and is non...

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

4237 RAPID Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin bed and medium bed adhesive up to 15 mm. For installing all types of tile, stone and agglomerates.

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

Roofing and Tanking Membrane.

PROHESIVE PROFLEX is a high strength, polymer and rubber modified, flexible, cement based adhesive which has been specially formulated to provide extra flexibility and extended coverage. It is suitable for most tiling applications including tile on tile, green screeds and it can be used in both internal and external situations for floor and wall tiling.

PRIME-N-BOND™ is a versatile, ready-to-use, single coat, low VOC primer designed to enhance the adhesion of adhesives to many smooth and non-absorptive substrates that can be difficult to bond to.

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Multipurpose Powder for Wall and Floor Tiles

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

Sikaflex 11FC is a fast curing one-component polyurethane sealant/adhesive with permanent elasticity.

Rapid Hardening, Rapid Drying, Slump-Free Mortar for External Repairs

Premium Polymer Modified Flexible Tile Adhesive

Extended Coverage Flexible Non-Slump Wall & Floor Ultralight Tile Adhesive

ARDEX UI 740 FLEXBONE Uncoupling Membrane is a high load-bearing bonded uncoupling membrane ideal for large format tiles in high traffic areas.

ARDEX WR 120 FR is a fine-grade, fibre-reinforced, acrylic render suitable for rendering walls, both internally and externally, at an application thickness from 2-12 mm.

ARDEX A 38 is a rapid set cement screed that has been designed for all types of floor coverings and is especially effective when installing moisture sensitive coverings.

ARDEX A 36 Abascreed is a factory proportioned premixed sand/cement screed for internal and external use.

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

Flexible Non Slump Wall and Floor Tile Adhesive

Sikafloor Broadcast  B1

211 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates.

Super Coverage Flexible Rubber Modified Tile Adhesive

MCB A-66 is a high strength, polymer and rubber modified, flexible, cement based adhesive which has been specially formulated to provide extra flexibility and extended coverage. It is suitable for most tiling applications including green screeds and it can be used in both internal and external situations for floor and wall tiling.

LATABOND™ is a specially designed latex admixture for use in Portland cement adhesives.

MVIS™ Veneer Mortar is a patented, versatile polymer fortified mortar designed specifically for the installation of adhered masonry veneer, stone and thin brick.

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

Economical Flexible Rubber Modified Tile Adhesive

MULTIFLEX Adhesive is an economical, flexible, rubber and polymer fortified cementitious powder-based thin set adhesive for installing ceramic tile and stone to floors and walls.

335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installing a wide range of tiles and stone including low absorption ceramic tile, porcelain tile, natural and manufactured stone using thin-set method of installation.

PROHESIVE ECOFLEX is a cost-effective, rubber modified, flexible, cement based adhesive that is suitable for bonding most types of tiles. It has been specially formulated to provide excellent coverage for use with large format tiles for both internal and external, floor and wall tiling applications. ECOFLEX is suitable for tile installations over green screed and render.

Multimastic Premium Adhesive is a white, non-flammable, ready to use latex adhesive designed for interior installations of ceramic tile and natural stone on both floors and walls.

WeldTec Versatile Waterproofing Membrane

MCB A-50 is a high strength, fast setting, polymer modified, flexible, cement based adhesive which has been specially developed for installing most types of tiles. It can be used for internal and external situations for floor and wall tiling. The non-slip/slump characteristics make it ideal for installing large and heavy tiles.

PROHESIVE PROSET is a rigid set, cement based adhesive used for bonding most types of absorbent ceramic tiles over masonry substrates. It can be used for both internal and external situations for floor and wall tiling. PROSET can be mixed with PROLASTIC to improve the adhesion and increase flexibility.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

The ultimate, sand free, lightweight, polymer fortified, thin-set adhesive for the installation of ceramic, stone and glass tiles.

ARDEX WA is a solvent free, epoxide resin-based grouting compound and thin bed adhesive, for use where chemical resistance is required.

PROHESIVE™ LITE is a multi- purpose, flexible, high strength adhesive in a lightweight formula with high coverage an excellent handling characteristics for a wide variety of floor and wall tile installations. Excellent for setting large format tile or stone, PROHESIVE™ LITE will not sag or slip on walls and offers non-slump performance for large format floor tile installations. Recommended for thin or medium bed applications up to 15mm thick on horizontal and vertical surfaces. Formulated with LITE technology PROHESIVE™ LITE is 40% lighter than traditional cement based adhesives. A 13.5 kg bag covers a greater area than a 20kg bag of traditional cement mortar. Suitable for use on a wide variety of substrates, polymer modified and accommodates horizontal substrate movement for interior and exterior tile installations.

Multimastic Premium Adhesive is a white, non-flammable, ready to use latex adhesive designed for interior installations of ceramic tile and natural stone on both floors and walls.

Sikafloor-CureHard-24 us a one part, clear liquid based on sodium silicate to cure, harden and seal fresh or hardened concrete. It reacts with the calcium hydroxide in the concrete to produce an improved resistant and dust free finish.

PROHESIVE™ MEGALITE is a premium high performance polymer modified multi- purpose, high flexibility, high strength adhesive in a lightweight formula with high coverage an excellent handling characteristics for a wide variety of floor and wall tile installations. Excellent for setting large format tile or stone, PROHESIVE™ MEGALITE will not sag or slip on walls and offers non-slump performance for large format floor tile installations. Recommended for thin or medium bed applications up to 20mm thick on horizontal and vertical surfaces . Formulated with LITE technology PROHESIVE™ MEGALITE is 40% lighter than traditional cement based adhesives.