General Construction

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

The Rhino Concrete Crack Lock (CCL) is a revolutionary new product that was developed to improve concrete crack repair.

Formol is a chemical release agent applied to concrete formwork. It is designed to act as a bond breaker between formwork or moulds and freshly placed concrete.

INFORMATION ARDEX RA 040 ARDEX RA 040 is a one-component, polyurethane based joint sealant. It has excellent bond strength to most porous and non-porous substrates without the use of a primer. ARDEX RA 040 is non-sag and may be applied on vertical and horizontal surfaces. Typical Uses:...

Gripset C-PLUG Rapid Set Water Plug Rapid setting, non shrink, cement based compound that forms an instant waterproof seal against active water leaks under pressure. Ideal for active water leakages through holes, cracks and similar openings in concrete and masonry surfaces. Rapid...

General Purpose Cement General Purpose Cement is a cost effective, high quality building material. The level of consistency and versatility of General Purpose cement makes it an ideal choice in virtually all construction applications. General Purpose Cement fully complies with the...

SikaGrout GP is a general purpose cementitious grout that is shrinkage compensated. SikaGrout GP is a blend of Portland cement, carefully selected and graded aggregates and admixtures.

Unique cold applied, crack sealing compound for asphalt and bitumen surfaces. Possessing flexible and fast drying properties to enable vehicular traffic after 15 minutes of application.

4237 RAPID Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin bed and medium bed adhesive up to 15 mm. For installing all types of tile, stone and agglomerates.

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

GP Grout is a multipurpose non shrink Class A cementitious grout.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

Rapid Hardening, Rapid Drying, Slump-Free Mortar for External Repairs

ARDEX WR 120 FR is a fine-grade, fibre-reinforced, acrylic render suitable for rendering walls, both internally and externally, at an application thickness from 2-12 mm.

Fibroseal® Primer is a waterborne penetrating treatment to weathered asbestos cement sheeting that soaks through the lichen and degraded asbestos down to sound base material, binding these unstable elements.

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

MAPEGROUT FAST-SET Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT FAST-SET with 15-16 parts of water. Pot life of mix: approximately 10...

LATABOND™ is a specially designed latex admixture for use in Portland cement adhesives.

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

Rapid Hardening & Drying Repair Mortar

Structural R4-class, rapid-setting, shrinkagecompensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete.

Acrylic Modifier represents a new generation of cement modifiers, developed to improve the physical properties of cement mortars and to produce exceptional performance in cement renders. It improves the chemical, corrosion, moisture and salt water resistance of cement renders.

Sikadur-42 (au) is a 3-component pourable or castable grout based on a solvent free epoxy resin and selected aggregates. Sikadur-42 (au) cures to form a hardened mortar with excellent adhesion to many substrates. This combined with the product’s ease of application makes it ideally suited to site application.

SikaSwell S-2 is one component polyurethane sealant which swells in contact with water.

ULW Mortar is a fine, light weight polymer modified mortar formulated for repairs to concrete or masonry, where a high build characteristic is required with intermediate compressive strength and thermal insulation and fire-resistant properties are desired.

TREMcrete HBM is a high build thixotropic synthetic fibre reinforced cement based rheoplastic and non-segregating mortar.

ARDEX BR 345 MICROTEC® Fibre-Reinforced, High Resistivity, Polymer-Modified, Structural Concrete Patching and Repair Mortar is designed for reinstating concrete surfaces damaged through concrete spalling and other chemical or mechanical causes

Sikagard-703W is a liquid, ready for use, silane/siloxane based impregnation.

Hydrophilic profile for construction joint sealing which swells in contact with water and particularly salt water, such as sea water and water containing de-icing salts.

Sika CureCrete is a water based membrane forming liquid for curing, dustproofing and hardening concrete. Sika CureCrete is suitable for use over new and old concrete and performs well both inside and outside without the adverse effects of solvent based systems.

Sika Injection Packers are filling valves or ports and connection pieces between the injection equipment and the structure. One way valves are located on the top of the injection packer and connect to the injection equipment.

ARDEX RA 56 is an ultra-low viscosity, 2-component hybrid polyurethane adhesive.

101 Rapid Latex Admix is a rapid setting, latex admixture for thin set mortars, cement grouts and cement mortar beds.

TREMcrete Activator is a chemically blended aqueous solution, free of chlorides, especially formulated as a Penetrative Corrosion Inhibitor that significantly hardens the surface and increases the durability of concrete.

Sika Plug is a chloride free, ready for use powder based on high alumina cement. When mixed with water, it becomes a powerful, fast setting waterplug.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikadur-42 HF is a pourable, multi-functional high density epoxy grout based on a 2-component solvent free epoxy resin system containing fine fillers. Sikadur-42 HF exhibits excellent flow characteristics in general grouting applications.

Crommelin Superseal Crommelin® Superseal is a premium, permanently flexible, closed cell polyurethane foam. It provides a positive seal against dust, vermin, moisture, vibration and air. Available in a range of sizes and profiles, Superseal joints tolerate large movement and remain...

ARDEX BG 90 GP is a general purpose, high-strength, Class-A-Type construction grout that can be mixed to a non-slump or pourable mix.

Rugasol 90 is a specially formulated liquid surface retarder for summer condition. Rugasol 90 will cause retardation to the surface of the freshly laid concrete, and will result in an exposed aggregate type finish.

Sika Injection Packers are filling valves or ports and connection pieces between the injection equipment and the structure. One way valves are located on the top of the injection packer and connect to the injection equipment.

ARDEX WR 100 is a fine-grade acrylic render suitable for rendering walls, both internally and externally, at application thicknesses of 2-10 mm.

Crommelin Superseal Crommelin® Superseal is a premium, permanently flexible, closed cell polyurethane foam. It provides a positive seal against dust, vermin, moisture, vibration and air. Available in a range of sizes and profiles, Superseal joints tolerate large movement and remain...