Sika Sikafloor-264T AU Part A 6.55kg Epoxy Floor Coating

Sikafloor®-264 T AU

Textured high build durable 100% solids pigmented non-blooming epoxy coating

Sikafloor®-264 T AU is a thixotropic, textured 2-component solvent free pigmented 100% solids high build epoxy coating for durable, decorative finishes. It can be applied to vertical surfaces in addition to providing a durable floor surface.

Usage

Sikafloor®-264 T AU can be used in a variety of industrial and commercial applications:

• Automotive workshops
• Food related premises
• Clean rooms and laboratories
• Pharmaceutical
• Stadiums
• Correctional facilities
• Amenities and washrooms
• General accessways and back of house

Advantages

• Tough and durable
• Very good abrasion resistance
• Excellent resistance to whitening/blooming from early exposure to surface moisture
• Textured non-slip surface
• Can be applied on vertical and horizontal surfaces
• Easily cleaned and maintained
• Very good chemical resistance

Packaging

Part A: 6.55 kg
Part B: 2.0 kg
Sikafloor Pigment: 1 x 1.15 kg
Part A+B+Pigment: 9.7 kg ready to mix kit (7.3 L)

Also available in larger kits:
Part A: 13.09 kg + Part B: 4.0 kg + 2 x 1.15 kg Pigment = 19.39 kg kit (14.6 L)
Part A: 15.39 kg (pre-pigmented) + Part B: 4.0 kg = 19.39 kg kit (14.9 L)

Colour

Resin - Part A: coloured, liquid
Hardener - Part B: transparent, liquid

Pre-pigmented kits available in 4 colours: RAL 7035 Light Grey, RAL 7040 Window Grey, RAL 7037 Dusty Grey, N45 Koala Grey. Non-standard colours can be supplied on request.

Product Details

Shelf Life: 12 months

Storage: Store away from direct sunlight, ideally between +5°C to +35°C.

Density

Part A: 1.41 kg/l
Part B: 1.00 kg/l
Pigment: 1.75 kg/l
Mixed Resin: 1.33 kg/l (all at +23°C)

Technical Information

• Shore D Hardness: 76 (7 days / +23°C)
• Abrasion Resistance: 70 mg (CS10/1000/1000, 8 days / +23°C)
• Gloss Level: Low sheen to semi gloss (depending on temperature at application)
• Layer Thickness: Approx. 0.6-0.7 mm total system DFT

Application

Ambient Air Temperature: +10°C min. / +30°C max.

Relative Air Humidity: 80% r.h. max.

Substrate Temperature: +10°C min. / +30°C max.

Pot Life: ~25 min at +10°C, ~15 min at +20°C, ~8 min at +30°C

Apply using a medium to long nap roller (15-20mm) with a central pole double frame arrangement. Apply evenly at the prescribed coverage rate then lay off in the opposite direction.