Stellmann Trades PRO Clear P4 30 m² Starter Bundle Anti-Slip Floor Coating Kit
Need help with technical specifications or product compatibility?
Chat with Ask TradieCart, our AI specialistStellmann Trades PRO Clear P4 – 30 m² Starter Bundle
The Stellmann Trades PRO Clear Starter Bundle packages Stellmann Non-Slip Clear PRO with the primer, cleaner and application tools a contractor needs to treat up to 30 m². Non-Slip Clear PRO is a water-based, dual-component polyurethane coating that makes existing floors slip-resistant without changing their appearance — it goes on in a single coat and cures to a transparent, UV-resistant satin finish.
This bundle is rated P4 under AS 4586.
⠀What's in the Bundle
- Coating system: Stellmann Non-Slip Clear PRO Part A and Part B, Stellmann Primer/Sealer, and Stellmann Prep and Maintenance Cleaner (5 L concentrate)
- Application tools: roller sleeves, roller frames, paint tray and extension pole
- Prep and protection: gloves, sponge and protective items
- Extras and client tools: Stellmann Cleaning Kit (Prep and Maintenance Cleaner plus cleaning brush), mixing jug, mixing paddle and masking tape
⠀Features & Benefits
- CSIRO certified to AS/NZS 4586:2013 (wet pendulum, Slider 96 and Slider 55) — available in P3, P4 and P5 slip ratings
- European slip ratings R11 and R13, plus Class C for barefoot wet areas (DIN EN 16165, Annex A)
- Transparent, UV-resistant and non-yellowing — keeps the look of the existing surface
- Single coat — satin finish when rolled, matt when spray applied
- Low VOC — less than 0.5% by weight, certified by CETEC to ASTM D3960
- Excellent chemical and mechanical resistance; resists rain and condensation
- Water-based, with water clean-up
- For interior and exterior use · Made in Europe
⠀Recommended Uses — P4
Outdoor entry areas, walkways, external ramps including sloping driveways, footpaths, pedestrian crossings, balconies, verandas, courtyards, serving areas, behind bars in hotels and pubs, swimming pool surrounds and communal shower rooms.
⠀Suitable Surfaces
Tiles and ceramics, natural and engineered stone, marble, sandstone, terracotta, bluestone, slate and other porous stone, fibre cement, fibreglass, acrylics, polyurethane and epoxy, vinyl, timber, metal including steel, and glass — applied over Stellmann Clear Primer.
⠀Technical Data
| Base | Water-based polyurethane |
| Components | 2 (Part A + Part B) |
| Mix ratio | 5 : 1 by weight (Part A : Part B) |
| Number of coats | 1 |
| Spreading rate | Approx. 72 g of mixed coating per m² |
| Slip rating | P4 (AS 4586) |
| Finish | Satin when rolled, matt when sprayed |
| Colour | Transparent |
| Pot life | Up to 2 hours, depending on temperature and humidity |
| Curing (23°C, 50% RH) | Tack free 90–180 minutes · trafficable 12 hours · full chemical cure 5 days |
| Application temperature | 15°C – 35°C (air and substrate) |
| Relative humidity | Max. 85% |
| Concrete moisture | Less than 3% |
| Heat resistance | Up to 120°C dry heat |
| VOC | Less than 0.5% by weight |
| Clean up | Water |
| Shelf life | 1 year unopened, stored dry, dark and cool. Protect from direct sunlight and frost. |
| Transport | Not dangerous goods |
⠀Application
- Clean thoroughly with Stellmann Prep and Maintenance Cleaner and allow to dry. Do not clean with alcohols, isopropanol, acetone or similar solvents — they can leave an invisible film that stops the coating adhering.
- Prime with Stellmann Primer diluted 1:1 with water, applied as a thin film with a sponge or flat microfibre mop. Curing time is approx. 30 minutes.
- Stir Part A for 5 minutes, then mix Part A and Part B at 5 : 1 by weight for at least 5 minutes, measured on an electronic precision scale — never with millilitre cups.
- Roll a single even coat, working in sections and finishing each section in the same direction. Do not apply a second coat or roll back into finished sections.
- Stellmann recommend their PRO rollers; any other roller must be tested first, and no warranty is given on the finish or slip rating when other rollers are used.
⠀Limitations
- Do not apply when rain threatens, or when relative humidity is (or is likely to go) above 85%.
- Not for areas with faulty waterproofing, high moisture content, rising damp or negative hydrostatic pressure.
- Do not apply over nano or other water-repellent treatments.
- Do not start in direct sun above 30°C — switch to HVLP spray application instead.
- Not recommended where acid or alkali spillage may occur, or for permanent immersion.
How to Apply Non-Slip Coating Professionally — Contractor Installation Guide
Non-Slip Clear PRO — Pre-Application Prep-Clean
How To Apply Stellmann Clear Primer — Light & Dark Tile
Non-Slip Clear — 10cm Roller in a Shower
Non-Slip Clear PRO — Bathroom Floor with 10cm Roller
Non-Slip Clear PRO P4 — Four Tiles Section with 18cm Roller
How To Apply Non-Slip Clear PRO — 25cm Roller
Non-Slip Clear PRO P4 — Dark Tiles
Non-Slip Clear PRO P4 with 25cm Roller
How To Spray Apply Non-Slip Clear PRO — Graco
- Anti-Slip Treatments
- Polyurethane Floor Coating
- Protective Coatings
- Trafficable Coatings
- Acrylic resin
- Bluestone
- Engineered Stone
- Epoxy and polyurethane finishes
- Fibreglass
- Glass
- Marble
- Metal
- Natural Stone
- Porcelain & Ceramic
- Sandstone
- Slate
- Steel
- Timber
- Vinyl
| Sort by Price (ex GST) | Sort by Colour | Sort by Variant | Sort by Size | |
|---|---|---|---|---|
$640.00
($704.00 inc gst)
|
|
Colour:
|
Variant:
|
Size:
|
$1,070.00
($1,177.00 inc gst)
|
|
Colour:
|
Variant:
|
Size:
|
$640.00
($704.00 inc gst)
|
|
Colour:
|
Variant:
|
Size:
|
$1,070.00
($1,177.00 inc gst)
|
|
Colour:
|
Variant:
|
Size:
|
$640.00
($704.00 inc gst)
|
|
Colour:
|
Variant:
|
Size:
|
$1,070.00
($1,177.00 inc gst)
|
|
Colour:
|
Variant:
|
Size:
|
No reviews found