General Construction

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

The Rhino Concrete Crack Lock (CCL) is a revolutionary new product that was developed to improve concrete crack repair.

Formol is a chemical release agent applied to concrete formwork. It is designed to act as a bond breaker between formwork or moulds and freshly placed concrete.

INFORMATION ARDEX RA 040 ARDEX RA 040 is a one-component, polyurethane based joint sealant. It has excellent bond strength to most porous and non-porous substrates without the use of a primer. ARDEX RA 040 is non-sag and may be applied on vertical and horizontal surfaces. Typical Uses:...

Gripset C-PLUG Rapid Set Water Plug Rapid setting, non shrink, cement based compound that forms an instant waterproof seal against active water leaks under pressure. Ideal for active water leakages through holes, cracks and similar openings in concrete and masonry surfaces. Rapid...

General Purpose Cement General Purpose Cement is a cost effective, high quality building material. The level of consistency and versatility of General Purpose cement makes it an ideal choice in virtually all construction applications. General Purpose Cement fully complies with the...

SikaGrout GP is a general purpose cementitious grout that is shrinkage compensated. SikaGrout GP is a blend of Portland cement, carefully selected and graded aggregates and admixtures.

Unique cold applied, crack sealing compound for asphalt and bitumen surfaces. Possessing flexible and fast drying properties to enable vehicular traffic after 15 minutes of application.

4237 RAPID Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin bed and medium bed adhesive up to 15 mm. For installing all types of tile, stone and agglomerates.

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

GP Grout is a multipurpose non shrink Class A cementitious grout.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

Rapid Hardening, Rapid Drying, Slump-Free Mortar for External Repairs

ARDEX WR 120 FR is a fine-grade, fibre-reinforced, acrylic render suitable for rendering walls, both internally and externally, at an application thickness from 2-12 mm.

Fibroseal® Primer is a waterborne penetrating treatment to weathered asbestos cement sheeting that soaks through the lichen and degraded asbestos down to sound base material, binding these unstable elements.

MAPEGROUT FAST-SET Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT FAST-SET with 15-16 parts of water. Pot life of mix: approximately 10...

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

LATABOND™ is a specially designed latex admixture for use in Portland cement adhesives.

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

Acrylic Modifier represents a new generation of cement modifiers, developed to improve the physical properties of cement mortars and to produce exceptional performance in cement renders. It improves the chemical, corrosion, moisture and salt water resistance of cement renders.

Structural R4-class, rapid-setting, shrinkagecompensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete.

Rapid Hardening & Drying Repair Mortar

Sikadur-42 (au) is a 3-component pourable or castable grout based on a solvent free epoxy resin and selected aggregates. Sikadur-42 (au) cures to form a hardened mortar with excellent adhesion to many substrates. This combined with the product’s ease of application makes it ideally suited to site application.

SikaSwell S-2 is one component polyurethane sealant which swells in contact with water.

ULW Mortar is a fine, light weight polymer modified mortar formulated for repairs to concrete or masonry, where a high build characteristic is required with intermediate compressive strength and thermal insulation and fire-resistant properties are desired.

TREMcrete HBM is a high build thixotropic synthetic fibre reinforced cement based rheoplastic and non-segregating mortar.

ARDEX BR 345 MICROTEC® Fibre-Reinforced, High Resistivity, Polymer-Modified, Structural Concrete Patching and Repair Mortar is designed for reinstating concrete surfaces damaged through concrete spalling and other chemical or mechanical causes

Sikagard-703W is a liquid, ready for use, silane/siloxane based impregnation.

Hydrophilic profile for construction joint sealing which swells in contact with water and particularly salt water, such as sea water and water containing de-icing salts.

Sika CureCrete is a water based membrane forming liquid for curing, dustproofing and hardening concrete. Sika CureCrete is suitable for use over new and old concrete and performs well both inside and outside without the adverse effects of solvent based systems.

101 Rapid Latex Admix is a rapid setting, latex admixture for thin set mortars, cement grouts and cement mortar beds.

Sika Injection Packers are filling valves or ports and connection pieces between the injection equipment and the structure. One way valves are located on the top of the injection packer and connect to the injection equipment.

ARDEX RA 56 is an ultra-low viscosity, 2-component hybrid polyurethane adhesive.

Sika Plug is a chloride free, ready for use powder based on high alumina cement. When mixed with water, it becomes a powerful, fast setting waterplug.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

TREMcrete Activator is a chemically blended aqueous solution, free of chlorides, especially formulated as a Penetrative Corrosion Inhibitor that significantly hardens the surface and increases the durability of concrete.

Sikadur-42 HF is a pourable, multi-functional high density epoxy grout based on a 2-component solvent free epoxy resin system containing fine fillers. Sikadur-42 HF exhibits excellent flow characteristics in general grouting applications.

Crommelin Superseal Crommelin® Superseal is a premium, permanently flexible, closed cell polyurethane foam. It provides a positive seal against dust, vermin, moisture, vibration and air. Available in a range of sizes and profiles, Superseal joints tolerate large movement and remain...

ARDEX BG 90 GP is a general purpose, high-strength, Class-A-Type construction grout that can be mixed to a non-slump or pourable mix.

Sika Injection Packers are filling valves or ports and connection pieces between the injection equipment and the structure. One way valves are located on the top of the injection packer and connect to the injection equipment.

Rugasol 90 is a specially formulated liquid surface retarder for summer condition. Rugasol 90 will cause retardation to the surface of the freshly laid concrete, and will result in an exposed aggregate type finish.

ARDEX WR 100 is a fine-grade acrylic render suitable for rendering walls, both internally and externally, at application thicknesses of 2-10 mm.

Sikagard-700S is a single-pack solvent containing impregnation based on silane/siloxane with good penetrative properties. It forms a hydrophobic (water repellent) but water vapour permeable surface on mineral substrates.

SikaQuick 2500 (au) is a one component, very rapid hardening, early strength gaining, cementitious patching material for concrete.

Crommelin Superseal Crommelin® Superseal is a premium, permanently flexible, closed cell polyurethane foam. It provides a positive seal against dust, vermin, moisture, vibration and air. Available in a range of sizes and profiles, Superseal joints tolerate large movement and remain...

Formol is a chemical release agent applied to concrete formwork. It is designed to act as a bond breaker between formwork or moulds and freshly placed concrete.

SikaSwell®-Profiles are rubber, sealing profiles which swell they come into contact with water.

ARDEX RA 54 is used to fill interior control joints or new construction saw joints on horizontal concrete surfaces.

Sikadur 55 SLV is a 2-component, 100% solids, moisture-tolerant, epoxy crack healer / penetrating sealer, having a fast tack-free time to minimize downtime. It is a super low-viscosity, high-strength adhesive formulated specifically for sealing both dry and damp cracks. It conforms to the current ASTM C-881, Types I and II, Grade-1, Class-C* and AASHTO M-235 specifications.

SikaGrout-HES is a ready mixed, high quality, grout that sets rapidly with high early strengths. SikaGrout-HES is a blend of high alumina cement, selected and graded aggregates, and Sika admixtures, enabling it to achieve high strengths in short time frame.

SikaGrout-212 HP is a blend of Portland cement, carefully selected and graded aggregates and Sika Admixtures, enabling it to achieve high strengths in short times, making SikaGrout-212 HP suitable for grouting fixing bolts and anchors or bedding machinery in the most demanding of circumstances.

Formol is a chemical release agent applied to concrete formwork. It is designed to act as a bond breaker between formwork or moulds and freshly placed concrete.

ARDEX WR 80 FR is a fine-medium grade render and is suitable for rendering walls, both internally and externally, at an application thickness from 2-10mm.

Sika CureCrete is a water based membrane forming liquid for curing, dustproofing and hardening concrete. Sika CureCrete is suitable for use over new and old concrete and performs well both inside and outside without the adverse effects of solvent based systems.

Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika®-Waterbars are available in different sizes and types, depending on their use.

Fibroseal® Topcoat is a waterborne high-build elastomeric roofing membrane. Fibroseal® Topcoat is applied to a weathered asbestos cement surface that has been pre-treated with Crommelin Fibrosealâ Primer to provide a durable, decorative, lightfast protective coating.

Sikagard-680S is a 1-component methacrylic resin based protective and decorative coating. Sikagard-680S protects concrete and most mineral-based substrates against aggressive atmospheres, moisture ingress and carbonation. Sikagard-680S allows two way water vapour diffusion enabling the treated structure to breathe.

Sika® MonoTop® FC is a one component, polymer modified, cementitious levelling mortar containing reactive silica fume. It is based on a formulated blend of very fine natural aggregates. Sika MonoTop FC (AU) is part of the MonoTop System for concrete repair and protection.

Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika®-Waterbars are available in different sizes and types, depending on their use.

SikaGrout-Deep Pour is a blend of Portland cement, carefully selected and graded aggregates and Sika Admixtures, enabling it to achieve high strengths in short times, making SikaGrout-Deep Pour suitable for grouting of large sections and deep pours of up to 500mm.