General Construction

Unique cold applied, crack sealing compound for asphalt and bitumen surfaces. Possessing flexible and fast drying properties to enable vehicular traffic after 15 minutes of application.

SikaGrout GP is a general purpose cementitious grout that is shrinkage compensated. SikaGrout GP is a blend of Portland cement, carefully selected and graded aggregates and admixtures.

GP Grout is a multipurpose non shrink Class A cementitious grout.

Sika Plug is a chloride free, ready for use powder based on high alumina cement. When mixed with water, it becomes a powerful, fast setting waterplug.

Structural R4-class, rapid-setting, shrinkagecompensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete.

General Purpose Cement General Purpose Cement is a cost effective, high quality building material. The level of consistency and versatility of General Purpose cement makes it an ideal choice in virtually all construction applications. General Purpose Cement fully complies with the...

INFORMATION ARDEX RA 040 ARDEX RA 040 is a one-component, polyurethane based joint sealant. It has excellent bond strength to most porous and non-porous substrates without the use of a primer. ARDEX RA 040 is non-sag and may be applied on vertical and horizontal surfaces. Typical Uses:...

Sikaflex® Tank N is a one part, moisture curing, elastic joint sealant which is used in areas for the storage, filling and handling of water polluting liquids.

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

Sikadur 31 / SIKADUR-41 Sikadur 31 Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions...

4237 Latex Additive is a specially designed latex additive for use with 211 to make high strength latex thin-set bed up to 3 mm and medium bed up to 15 mm mortars.

Gripset C-PLUG Rapid Set Water Plug Rapid setting, non shrink, cement based compound that forms an instant waterproof seal against active water leaks under pressure. Ideal for active water leakages through holes, cracks and similar openings in concrete and masonry surfaces. Rapid...

Sika MonoTop-412 NFG is a 1-component, polymer modified, fibre reinforced, low shrinkage structural repair mortar with corrosion inhibitor meeting the requirement of class-R4 of EN 1504-3.

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

MAPEGROUT FAST-SET Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT FAST-SET with 15-16 parts of water. Pot life of mix: approximately 10...

Sika MonoTop®-436 N is a 1-component pre-bagged, pourable, self-compacting, repair mortar meeting the requirements of class R4 of EN 1504-3.

SikaSwell S-2 is one component polyurethane sealant which swells in contact with water.

ARDEX WR 120 FR is a fine-grade, fibre-reinforced, acrylic render suitable for rendering walls, both internally and externally, at an application thickness from 2-12 mm.

Sikadur 501 Sand Part C 5kg of Sikadur 41 10kg Kit

Sikadur-33 is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive.

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

Ardex Heavy Duty Dual-Cartridge Caulking Gun (1:1 & 2:1 Ratio / 470ml & 627ml)

The Rhino Concrete Crack Lock (CCL) is a revolutionary new product that was developed to improve concrete crack repair.

SikaGrout-212 HP is a blend of Portland cement, carefully selected and graded aggregates and Sika Admixtures, enabling it to achieve high strengths in short times, making SikaGrout-212 HP suitable for grouting fixing bolts and anchors or bedding machinery in the most demanding of circumstances.

SikaGrout-HES is a ready mixed, high quality, grout that sets rapidly with high early strengths. SikaGrout-HES is a blend of high alumina cement, selected and graded aggregates, and Sika admixtures, enabling it to achieve high strengths in short time frame.

Sikadur-42 HF is a pourable, multi-functional high density epoxy grout based on a 2-component solvent free epoxy resin system containing fine fillers. Sikadur-42 HF exhibits excellent flow characteristics in general grouting applications.

SikaQuick 2500 (au) is a one component, very rapid hardening, early strength gaining, cementitious patching material for concrete.

3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, portland cement and graded aggregates.

Fibroseal® Primer is a waterborne penetrating treatment to weathered asbestos cement sheeting that soaks through the lichen and degraded asbestos down to sound base material, binding these unstable elements.

ULW Mortar is a fine, light weight polymer modified mortar formulated for repairs to concrete or masonry, where a high build characteristic is required with intermediate compressive strength and thermal insulation and fire-resistant properties are desired.

Fairing Mortar is a polymer modified single component cementitious feathering mortar.

Rapid Hardening & Drying Repair Mortar

Mixing Nozzles for ARDEX Crack Injection Range

Fast setting patching compound.

SikaGrout GP is a general purpose cementitious grout that is shrinkage compensated. SikaGrout GP is a blend of Portland cement, carefully selected and graded aggregates and admixtures.

Sika Thinner C 20 Litres

Sikagard-700S is a single-pack solvent containing impregnation based on silane/siloxane with good penetrative properties. It forms a hydrophobic (water repellent) but water vapour permeable surface on mineral substrates.

Sika MonoTop-352 NFG is a 1-component, polymer modified, fibre reinforced, low shrinkage light weight structural repair mortar with corrosion inhibitor meeting the requirement of class R3 of EN 1504-3.

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures, respectively.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

Sika Sikaswell-A 2010 Red 20mm x 10mm x 10mtr Roll [Waterproofing] 20mm x 10mm x 10mtr Roll

TREMcrete HBM is a high build thixotropic synthetic fibre reinforced cement based rheoplastic and non-segregating mortar.

ARDEX RA 88 PLUS is a two component, high performance ceramic blend epoxy.

ARDEX RA 142 is a Super Low Viscosity, two-component epoxy adhesive perfect for gravity-feed and pressure injection repair of hairline to fine width horizontal cracks.

Fast setting patching compound.

Formol is a chemical release agent applied to concrete formwork. It is designed to act as a bond breaker between formwork or moulds and freshly placed concrete.

Sikadur-53 is a pourable high density mortar, based on a 2-component solvent free epoxy resin containing fine fillers. Sikadur-53 is highly insoluble in water and readily displaces water enabling it to be employed in wet and underwater applications.

The Sikadur-Combiflex SG system is a high performance joint and crack sealing system for construction joints, expansion (movement) joints and connection joints or cracks. The system allows variable and high levels of movement in one or more directions, whilst maintaining a high quality watertight seal. The Sikadur-Combiflex SG system consists of a modified flexible Polyolefin (FPO) waterproofing tape, with advanced adhesion properties and a range of different special Sikadur epoxy adhesives for use in different types of applications and conditions.

Sika SikaSwell S-2 Nozzles

LATABOND™ is a specially designed latex admixture for use in Portland cement adhesives.

Fibroseal® Topcoat is a waterborne high-build elastomeric roofing membrane. Fibroseal® Topcoat is applied to a weathered asbestos cement surface that has been pre-treated with Crommelin Fibrosealâ Primer to provide a durable, decorative, lightfast protective coating.

Fibroseal® Topcoat is a waterborne high-build elastomeric roofing membrane. Fibroseal® Topcoat is applied to a weathered asbestos cement surface that has been pre-treated with Crommelin Fibrosealâ Primer to provide a durable, decorative, lightfast protective coating.

Fibroseal® Topcoat is a waterborne high-build elastomeric roofing membrane. Fibroseal® Topcoat is applied to a weathered asbestos cement surface that has been pre-treated with Crommelin Fibrosealâ Primer to provide a durable, decorative, lightfast protective coating.

ARDEX RA 56 is an ultra-low viscosity, 2-component hybrid polyurethane adhesive.

ARDEX BR 345 MICROTEC® Fibre-Reinforced, High Resistivity, Polymer-Modified, Structural Concrete Patching and Repair Mortar is designed for reinstating concrete surfaces damaged through concrete spalling and other chemical or mechanical causes

ARDEX BR 460 FLOW High Performance, Flowable Structural Micro Concrete is a pourable repair mortar designed for reinstating horizontal concrete surfaces.

ARDEX BG 90 GP is a general purpose, high-strength, Class-A-Type construction grout that can be mixed to a non-slump or pourable mix.